RV- 6/6A RV - 7/7A RV - 9/9A
Our Vans RV6/6A, RV7/A and RV9/A provide our customers a professionally manufactured kit with loads of options at a very attractive price.
Our Standard Kits include the following:
2 Complete Seats (Seat Backs and Seats)
2 Side Panels
2 Stick Boots
4 Recessed Panel Covers for above the Lower Panels
2 Spar Cap covers
2 Arm Rests
The Seats themselves can be manufactured as high back, low back, or headrest models. Low back model seats extend approx. 5 cm above the seat, while the high back seats extend 12 cm above the seat (2 inch and 4.5 inches, respectively. On the head rest option seats the seat extends a total of 16 cm above the seat frame back while still offering access to the baggage compartment.
The seats are manufactured from standard PU Foam, and have a single upper layer of Viscous (memory) foam.
Side Panels are manufactured as a single piece, and include two pockets on each side for aircraft with Tricycle gear configurations, while aircraft with Tailwheels are afforded an extra pocket (3 in total) on the lower side panels. The upper side panels are manufactured to fit in the airframe recesses, and a provision is made if the aircraft is equipped with a tip up canopy.
In addition to the standard kit components, we are also able to furnish the following items:
Baggage Compartment Sidewall Panels (6 pieces total - 3 left/3right)
Baggage Bulkhead Cover with provisions for seatbelt cable attachment. Here we can integrate Embrodery
Carpets for Cabin Floor and Baggage Compartment. Out carpet kits include a high density closed cell foam for between the stringers as well as necessary velcro for attachment.
Baggage Compartment Tonneau Cover
Options for the seating include material options, finishing options, and integrated options such as lumbar supports, seat heaters. If you are feeling frisky we can even include integral blowers (6 in each seat) to help you keep cool (seat covering is limited to perforated leather or a breathable fabric).
If you are interested in finding out more about our RV-6, RV-7 and RV-9 interior kits, please feel free to contact us. We would be happy to discuss your needs.
Site Disclaimer.
Please note that Lemke Autosattlerei & Moebelpolsterei of Karlstadt, Germany, is not affiliated with Zenith Aircraft Company or Vans Aircraft Company. Our products are not designed by, manufactured for, or approved by, Zenith/Vans Aircraft Company. Our designs have been developed working with actual customers who own Vans/Zenith Aircraft. The use of any logo on our seats is based on information supplied to us by our customers, and is completed at the request of our customers wishes. It is up to the customer to ensure, upon requesting work, to ensure that no use of a particular logo violates any Trademark or Copyright Law.
Alle Rechte vorbehalten | Lemke Autosattlerei & Möbelpolsterei